Table of Contents
Advertisement
Video
Problem
I am using a TV with
my SMC, but I can't see
anything�
I cannot see anything on
the TV, but I have volume
on my speakers�
The quality of the picture
on my display is poor�
(colors are bad, distorted
video, washed out, etc�)
My SMC doesn't
recognize my digital
video camera�
My SMC doesn't
recognize my analog
video camera�
Solution
•
Check that the correct input source is selected
on the TV�
•
Check that the TV is correctly connected to the
SMC� See Ch� 8 Connecting Video on how to
correctly connect the TV to the SMC�
•
Verify any other video/cable connections from
your TV to the SMC�
•
Make sure the S-video and composite
connections are connected to a TV or video
input when the SMC is turned on; if they're not,
they will turn off automatically�
Ensure the connections are made, and then
turn off the SMC by pressing and holding down
the Power button for four seconds.
•
Check your input switches�
•
See Ch� 15
NVIDIA Display Setup for
procedures on how to change video settings for
your NVIDIA video card�
•
Check that the FireWire cable is correctly
connected to the camera and to the SMC and
that the cable is in good condition�
•
Disconnect the camera from the SMC
and reconnect it� If the camera is correctly
connected, the message New Hardware
Found appears�
•
Check that the A/V cable is correctly connected
to the camera and to the SMC and that the
cable is in good condition�
Smart Media Console Installation Manual
113
Advertisement
Table of Contents
