Bernina Bernette 340 deco User Manual page 40

C
D
# 02260
# 04095
Embroidery
1
After finishing the first section, the screen will show the instruction
window (C).
Raise the presser foot. The screen will show the instruction
window (D).
• If Auto Thread Cutter is set to ON, the machine has trimmed the
threads automatically.
• If Auto Thread Cutter is set to OFF, trim the threads with scissors
or by pressing the Thread Cutter button
Note:
Instruction window (D) closes automatically after a few seconds in
order to give you free sight to the new colour to be used for
threading. Press Close , to speed up this process.
X
Change the thread to the next color.
Lower the presser foot and press the start/stop button to stitch the
second color section.
Press the Carriage to Front key after finishing the last section to
return the carriage to the unload position.
1. Carriage to Front key
Note:
Be sure to return the carriage to the unload or idle position before
turning the power switch off. Use the keys Utility and Return
Carriage as described on page 25.
39