Design Transfer And Compatibility; Memory Media Overview - Bernina Bernette 340 deco User Manual

User guide

Hide thumbs Also See for Bernette 340 deco:

Brochure (2 pages)

Workbook (54 pages)

Table Of Contents

Table of Contents

Design Transfer to the bernette 340 Deco

The bernette 340 Deco can read all BERNINA design cards. To run

non licensed designs from BERNINA CD you require BERNINA

Embroidery Software or OESD Explorations Software which can be

used to convert the .ART files and write them onto an ATA Personal

Design Card or USB Stick. Please note, that licensed designs on CD

cannot be transferred to the Deco 340.

Most other brand cards and designs on the market can be used by

converting these files or cards through optionally available PC

software and accessories. This includes Bernette / BERNINA

deco 500/600/650 cards, for which you may use the Magic Box TM

or the Swap Box from OESD. Please refer to the respective manuals

for details of the transfer procedure and note, that the Deco 340 in

this case will behave like an artista 165 - 185.

Important Note about Design Copyrights:

All designs have a copyright. It is up to the artist of the design as to which extend he is allowing you to use the embroidery design files you have

purchased. Please refer to the copyright information provided with the design collection or contact the design distributor if you are unclear as to what

rights you have with the embroidered designs and design files. You could be violating federal law if you copy files unauthorized or if you sell products

with embroidered with licensed designs.

Further general information about copyright can be obtained from Embroidery Software Protection Coalition (ESPC), which is a non-profit group of

embroidery software and design manufacturers, whose purpose is to defend the integrity and quality of embroidery products by promoting copyright

compliance. This company can be reached at www.embroideryprotection.org or toll free in the US at 1-888-921-5732.