Pattern Selection Window; Open Designs From Internal Memory; Open For Lettering / Monogramming; Open Designs On Cards - Bernina Bernette 340 deco User Manual

32
Key Operations

Pattern Selection Window

The main screen with the Pattern Selection Window will start
automatically when the embroidery computer is switched on. Use
this window to open embroidery designs from the following
locations:
• Built-in Designs
• Lettering (integrated or design card with alphabets)
• Design Cards
• USB Stick
• Personal Designs stored in the internal memory of the Deco 340
Read how to open designs from these location on the next pages.
Pattern selection window
Press one of the five tabs to select the desired category.

1 Open designs from internal memory

There are 100 factory built-in designs available. For details of the
designs such as size and stitch count please refer to the table in the
1
appendix.
2
This category also allows you to access the Personal Designs which
you previously saved into the internal memory. Please refer to the
3
next page («Built-in/Personal key»)
4

2 Open for Lettering / Monogramming

There are three fonts for lettering (Gothic, Script and Cheltenham)
5
built into the Deco 340. Further there is a choice of 3- letter and
2- letter monogramming available.
Use this selection as well to open fonts from the optional Design
Cards with alphabets.

3 Open Designs on Cards

Use this category to open embroidery designs from the optionally
available Design Cards. Every BERNINA embroidery card can be used.
For further details about compatibility of Design Cards please refer
to corresponding chapter «Design Transfer and Compatibility»
Choose frames included on Design Cards with alphabets through
this category
4 Open Designs on USB Stick
Use this category to open embroidery designs from optionally
available USB Sticks.
5 Editing
The editing function allows you to modify and combine the
embroidery designs from various sources.
For details see page 46- 53.