Deleting Designs From Memory - Bernina Bernette 340 deco User Manual

34
USB \ Embf5 \ FOLDER1AB
EMB_1 EMB_2 EMB_3
EMB_5 EMB_6 EMB_7
EMB_1 EMB_2
EMB_3
EMB_6
EMB_4 EMB_5
Key Operations
1/2
A.B. C
EMB_4
EMB_8
1/2

Deleting Designs from Memory

You may delete design files from your Personal Designs, ATA card or
USB Stick provided, that these memory media are not write
protected.
1. In the Pattern Selection Window select the location from which
you want to delete a file by pressing the corresponding tab.
Note:
To delete a design in a folder of a USB Stick you must first select the
correct folder.
2. Press the delete key
location will open.
3. Scroll through the pages to find the design you want to delete
Caution:
On USB Sticks with folders, these will be displayed on the first scroll
pages. To delete single files do not select the folder - If you proceed
the folder with all designs contained will be deleted.
4. Press the key with the design you want to delete.
5. A confirmation dialog will open.
Press OK to delete the selected design file.
Note
To cancel your selection without deleting the file press the close key.
and a dialog box with all designs in this