28
28
1
2
3
1
0
2
3
4
0
1
4
0
1
2
3
4
5
1
0
2
Maximum speed setting
650spm
(A)
Touch Screen Calibration
Touch Screen Calibration
Press ( ).
(B)
Touch Screen Calibration
Touch Screen Calibration
(C)
+
+
+
+
+
+
5
2
Yes
+
OFF
ON
X
Press (
).
End
End
Key Operations
Key Operations
1 Screen contrast
1 Screen contrast
The touch screen contrast can be adjusted.
Press the plus
Press the minus
2 Sound control
2 Sound control
The buzzer volume can be adjusted. The volume level can be set
from 0 to 10 and the default setting is 5.
Press the plus
Press the minus
buzzer, set the level at 0.
3 Eco mode
3 Eco mode
If you have not used the computer for some time it will enter the
eco mode. The touch screen and the sewing light will turn off. They
will turn on again, when you touch the screen.
You can set the timer from one minute to 30 minutes.
Press the plus
Press the minus
To deactivate the eco mode, press the plus key until «OFF» appears
in the box.
4 Inch/Millimeter
4 Inch/Millimeter
You can set your computer's measuring unit to either inch or
millimeter depending upon your preference. The default unit setting
is millimeter.
Press the «inch» or «mm» key to select the unit you preferred.
5 Touch screen calibration
5 Touch screen calibration
If the touch panel doesn't respond as expected, the key positions
might be out of alignment. To realign press the Yes key. Window (A)
will show a sequence of crosses signs. Press the cross with your
finger tip. Having pressed one cross the next will be shown. Window
(B) shows for a few second when the calibration is completed.
6 Embroidery maximum speed:
6 Embroidery maximum speed:
The embroidery computer automatically adapts the stitch speed to
the design: slow for long stitches and fast for short stitches
The maximum embroidery speed can be changed from 400 to 750
spm. The default setting is 650 spm.
Press the minus
Press the plus
Note:
Note:
•Reduce the embroidery speed when designs with narrow satin
stitches are sewn. Those tend to become uneven at high speeds.
•When the speed of 750 spm is selected a warning message is
shown. (C)
key, to sharpen the screen contrast.
key, to fade the screen contrast.
key to increase the buzzer volume.
key to decrease the buzzer volume. To mute the
key to increase the timer setting.
key to decrease the timer setting.
key to reduce the maximum embroidery speed.
key to increase the maximum embroidery speed.