Inserting The Bobbin - Bernina Bernette 340 deco User Manual

10
1
4
5
Getting ready to Embroider

Inserting the bobbin

Place the bobbin in the bobbin holder with the thread unwinding
counter-clockwise.
1.
2.
2
Guide the thread into front notch on the front of the bobbin holder.
Draw the thread to the left, sliding it between tension spring blades.
3.
3
Continue to draw the thread lightly until the thread slips into side
notch.
4.
7
Pull out about 10 cm (4") of thread to the rear.
Refer to the threading chart shown on the hook cover plate to
check the threading
Re-attach the hook cover plate.
5.
6.
7.
6
Thread
Bobbin holder
Front notch
Side notch
Bobbin thread
Hook cover plate
Threading chart