Key Operations; Standard Keys - Bernina Bernette 340 deco User Manual

25

Key Operations

To make learning easy you will find the most important keys and
indications always at the same location on your Deco 340 screen.
For your convenience it is using icons and a status line. Please
familiarize yourself first with the basic procedures and these
important elements as described below.
When the machine is switched on, the pattern selection window
appears on the LCD touch screen.
Note:
It requires approximately six seconds for the pattern selection
window to be displayed on the LCD touch screen. This is the
required boot up time and is not a defect. During the boot up the
bernette 340 Deco logo is displayed.
To select a function, just touch the key on the screen with your
finger tip.
Caution:
Do not press the surface of the LCD touch screen with hard or sharp
pointed objects like pencils, screwdrivers, or the like.
Note:
The screen contrast as well as the adjustment of the touch screen
can be adjusted by touching the utility key and then setup

Standard Keys

1 Utility key
Press this key to open the mode selection window. There are 4
categories available in the mode selection window.
2 Setup key
Press this key to customize the user preferences.
3 Help key
Press this key to view the help topics for basic operations.
4 Hoop centering key
1
Press this key to move the hoop to the center position (starting
point for embroidery).
2 3
4
5
5 Return carriage key
Press this key to bring the carriage back to its idle position for
storage and transportation.
6 Close key
Pressing this key will close the utility selection window and return to
6 the previous screen.
Note:
Before you turn the power switch OFF, always be sure to press the
return carriage key to return the carriage to its idle position.