Winding The Bobbin - Bernina Bernette 25 Instruction Manual

10 Machine Setup

Winding the Bobbin

2
1
1. Place the thread and spool holder onto the spool pin.
For smaller spools of thread, place spool holder with the
small side next to the spool or use the small spool holder.
2. Snap the thread into the upper thread guide .
3. Wind the thread clockwise around the bobbin winder tension
discs.
4. Place the thread end through one of the inner holes in the
bobbin as illustrated and place empty bobbin on the spindle.
5. Push the bobbin to right.
502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN
3
-
4