Needle Threader - Bernina Bernette 25 Instruction Manual

Machine Setup 15

Needle Threader

Raise the needle to its highest position
and lower the presser foot.
Attention:
Turn power switch to the off position ("O").
Lower the needle threader lever slowly and
draw the thread through the thread guide as
illustrated and then to the right.
The needle threader automatically turns to
the threading position and the hook pin
passes through the needle eye.
Pull the thread to the right, guiding it to the
front of the needle
Hold the thread loosely and release the lever
slowly.
The hook will turn and pass the thread
through the needle eye forming a loop.
Pull the thread through the needle eye.
502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN