Bernina Bernette 25 Instruction Manual page 30

Operating Instructions 29
Stitch length button
Press the stitch length button to enter stitch
length adjustment mode.
To shorten the stitch length, turn the selector
wheel counter clockwise.
To increase the stitch length, turn the
selector wheel clockwise.
The stitch length can be adjusted between
"0.0-4.5 mm". Certain stitches have a limited
length.
When you select a stitch, the machine will
automatically set the recommended stitch
length which will be indicated by numbers on
the screen.
Stitch width button
Press the stitch width button to enter stitch
width adjustment mode.
For a narrower stitch, turn the selector wheel
counter clockwise.
For a wider stitch, turn the selector wheel
clockwise.
The stitch width can be adjusted between
"0.0-7.0 mm". Certain stitches have a limited
stitch width.
When you select a stitch, the machine will
automatically set the recommended stitch
width, which will be indicated by numbers on
the screen.
Function button - model 25
Press the function button to open function
program and change your sewing setting
(mirror, twin needle...etc) .
See chapter special functions details about
the use of this button.
502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN