Winding The Bobbin Thread - Bernina 590 User Manual

Sewing preparation
Prerequisite:
•
> Place the foam pad, the thread spool and the appropriate spool disc on the spool holder.
> Place the filled bobbin on the retractable spool pin.
> Add the appropriate spool disc.
> Place the thread spool.
> Thread the 3 threads up to the upper thread guide.
> Guide 2 threads past the thread tension discs (1) on the left and to the thread guide above the needle.
> Guide 1 thread past the thread tension discs (1) on the right and to the thread guide above the needle.
> Thread the first thread into the left needle manually.
> Thread the second thread into the center needle manually.
> Thread the third thread into the right needle manually.

Winding the bobbin thread

The bobbin thread can be wound while embroidering if the retractable spool pin is used for winding.
Prerequisite:
•
> Attach the empty bobbin on the winding unit so that the silvery sensor surface is down.
> Guide the thread to the left into the rear thread guide (1).
> Guide the thread around the thread pretension clockwise (2).
> Wind the thread clockwise 2 to 3 times around the empty bobbin (3).
> Pull the thread over the thread cutter at the engaging lever (4) and cut.
44
The triple needle is inserted.
The foam pad, the thread spool and the appropriate thread disc are positioned.
1
2
1
3
4