Bernina Bernette 25 Instruction Manual page 29

28 Operating Instructions
502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN
Needle up/down button
By pressing the needle up/down button the
needle will make half a stitch. Depending on
the actual needle position it will stop in the
opposite position, either at the highest or the
lowest position. At the same time the needle
stop position after sewing is permanently set.
When the needle stops down, the needle
down symbol " " will display.
Please Note
During sewing, press the needle up/down
button, the machine will stop automatically.
Slide speed
By adjusting the position of the slide speed
the top speed during sewing may be limited.
The position of the slider defines the sewing
speed at full stroke of the foot controller.
For slower speed: Slide toward ( )
For higher speed: Slide toward (+)
When the machine is run with the start/stop
button the position of the slide speed defines
the actual sewing speed.
Pattern group selection button
Press the pattern group selection button
once to enter stitch patterns.
Press this button twice to enter Alphabet.
" " Stitch pattern selection by numbers - 60
" "Alphabets - 95 ( model 25
–
)