Threading The Upper Thread - Bernina Bernette 25 Instruction Manual

Threading the Upper Thread

2
3
5
4
6
7
Please Note:
It is important to carry out the threading correctly as by not
doing so several sewing problems could result.
Start by raising the needle to its highest point, and also
raise the presser foot to release the tension discs.
1. Lift up the spool pin until it is snaped-in in the middle position.
Place the spool of thread on the spool pin so that the thread
comes from the front of the spool, then place the spool cap at
the end of the spool pin.
2. Snap the thread into the upper thread guide .
502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN
1
3
Machine Setup 13