Getting Started; Connect The Power - Uniden UDW20055 Owner's Manual

Connect the Power

1. Connect one AC adapter to the receiver's power input (all the AC adapters are exactly the same).
POWER POWER
voyants voyants
Statut de Statut de
mise en/hors mise en/hors
fonction fonction
4

Getting Started

button button
2. Attach an antenna to the rear of each
camera and connect an AC adapter to
the camera's power input pigtail. (If
necessary, connect the extension cord
to the camera's pigtail and connect the
AC adapter to the extension cord.)
3. Connect the other end of each adapter to a
120 volt AC (standard indoor) power outlet,
and press the
POWER
the receiver or on the remote control.
4. Make sure the Power status lights on the front of
the receiver and each camera all turn on.
If... Try...
- reconnecting the AC adapter
a
Power status
light doesn't
- seeing if the power outlet is
come on
controlled by a wall switch
button on the front of