Check The Video Signal - Uniden UDW20055 Owner's Manual

Check the Video Signal

As soon as the receiver powers on, it
detects the camera and shows the
video on the display. The icons at the
top of the screen tell you what's
going on with the camera and
receiver.
The table below shows the different
status icons and what they mean.
Since the icons appear based on the
state of the camera and receiver, you
won't see all of these icons at the
same time.
Icon
1 2 3
If...
the signal status icon shows no bars
or the display says No Signal
the signal status icon shows one or
two bars or the video quality is poor
there is a lot of static on the receiver
Signal status Signal status
What it means
The signal from the camera is 1-low, 2-fair, 3-good, or 4-perfect.
There is no signal from the camera.
The video currently on the display comes from the camera connected
4
to channel 1, 2, 3, or 4.
The video is currently zoomed in.
Try...
- making sure the camera is turned on
- re-pairing the camera and receiver (see page 14)
see page 19 for tips on improving video quality
see page 20 for tips on avoiding interference
Channel status Channel status
1 1
5