Getting Started; Connect The Power - Uniden UDW10055 User Manual

Connect the Power

1. Connect the standard AC adapter to the receiver's power input.
POWER
button
AC
Adapter
OK
Power status
lights
4

Getting Started

2. Attach an antenna to the rear of each camera and connect an
AC adapter to the camera's power input pigtail. (If necessary,
connect the extension cord to the camera's pigtail and connect
the AC adapter to the extension cord.)
3. Connect the other end of
each adapter to a 120 volt
AC (standard indoor)
power outlet, and press
the button on the
POWER
side of the receiver.
4. Make sure
the Power status lights on the front of the receiver
and each camera all turn on.
If...
a
Power status
light doesn't
come on
Antenna
Try...
- reconnecting the AC adapter
- seeing if the power outlet is
controlled by a wall switch
AC Adapter