Page 1
Portable receiver with 3-inch color LCD display Two AC adapters If any items are missing or damaged, contact our Customer Care Line immediately. Need Help? Get answers 24/7 at our website: www.uniden.com. If You... have a question or problem need a replacement part or accessory need special help due to a disability * During regular business hours, Central Standard Time.
This manual contains important information about this product’s operation. If you are installing this product for others, you must leave this manual or a copy with the end user. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: This equipment is NOT waterproof.
Clean only with a dry cloth. ► Failure to follow the instructions in this operating manual will void the warranty. Uniden assumes no liability for damages to property or injury to persons caused by improper handling or failure to comply with these safety instructions.
Connect the Power Connect one AC adapter to the camera’s power input and the other to the receiver’s power input. (The two adapters are exactly the same.) Connect the other end of each adapter to a standard 120 volt AC indoor outlet. Press the button on both the receiver and the camera;...
Check the Video Signal As soon as the receiver powers on, it detects the camera and shows the video on the display. The icons at the top of the screen tell you what’s going on with the camera and receiver. The table below shows the different status icons and what they mean.
Get to Know the Camera What the buttons do Button What it does Turn the camera on. Press POWER and hold to turn it off. Enter pairing mode. LINk What the lights mean Power Status light State What it means The camera is on.
Using the camera mount The camera has a built-in stand so you can place it on any flat surface. If you want to place your camera on a wall or a ceiling (or even if you just want to secure it to a flat surface), you can use the included camera mount.
Front Front Status lights: Status lights: Battery Battery Power Power BUTTONS BUTTONS MENU MENU LEFT LEFT DOWN DOWN SELECT SELECT CAMERA CAMERA What the buttons do Button What it does Open and close the menu MENU/Ok In zoom mode: pan to the left side of the zoom area. In the menu: cycle through the available options for the selected menu item.
Battery status What the connections do Connector Use it to Connect the receiver to your computer for use with the Uniden Guardian USB output Software. (See the software manual for more information.) Audio/video output Send the signal from the camera to a standard TV (see page 12).
To open the menu, To open the menu, press press DOWN DOWN to move to move the cursor the cursor Item Use it to Adjust the volume of the audio from the camera. Choose a value from 0 (off) Audio Vol through 20 (maximum).
The receiver can zoom in so you can see the video better. In zoom mode, the receiver increases the pixel size and focuses on the center of the picture. You will also see the ZOOM icon in the upper right corner of the display.
You can connect the receiver to any standard television with RCA composite video inputs. AV out AV out To use bandwidth efficiently, the system compresses the video signal using Motion-JPEG; the system then digitizes the signal before transmitting it to provide a secure video link. This method is optimized for wireless connections, but it can cause an indented image line (“ghosting”...
Your receiver supports a total of four active cameras at a time. You can mix and match any of the accessory cameras. (See our website for compatible camera options.) Pairing Cameras Pairing is like introducing the camera and the receiver so they can communicate. You’ll perform the pairing procedure if you want to add a new camera to your system or if you are having trouble with a camera.
On the receiver, press ► the last enabled channel, the receiver goes back to the first camera. Each time you press ► there is a camera present on that channel. If there is no camera signal on a particular channel, the receiver shows a black screen with the message No Signal.
Setting Up a Scan You can have the receiver automatically cycle through the enabled channels. Open the menu, and scroll down to select Scan time. to select the amount of time you want the receiver to stay on each camera. RIGHT LEFT Choose 5 seconds, 10 seconds, 15 seconds, or 20 seconds.
In quad display, the receiver puts all four channels on the screen at the same time. The channels appear in the positions shown to the right: If a channel is ► disabled or there is no signal from the camera, that channel's section of the quad display will be blank.
If you have any trouble with your system, try these simple steps first. If you still have a question, call our Customer Care Line listed on the front cover. If… The image on the display is too bright. The image on the display is too dim.
If… None of the buttons on the receiver respond when I press them. Unstable or Weak Signal If the video seems to lag and or the audio sounds weak, the camera and the receiver do not have a strong, clear signal between them. There are several causes for a weak signal: Possible Cause The camera might be too far from the receiver.
Signal Level Icon Perfect Good Fair Zero If the suggestions above don’t provide enough improvement in the the signal quality, you may want to run the camera at QVGA or zoom mode. When the camera is in zoom mode, it sends fewer pixels to the receiver, so the video performance is not as affected by the weak signal.
If the static is only on 1 camera Check near the camera for one of the common interference sources. Try moving the camera away from a suspected source, or try moving the suspected source so it’s not between the camera and the receiver. Try moving closer to the receiver.
Product Specifications Radio Frequency Transceiver RF Frequency Modulation Spread spectrum Anti Interference Selectable camera channel Data rate Channel bandwidth Transmitting range Image Specification Output Image resolution Image processing Exposure White balance System Specifications Camera Weight 110 g Dimension 115 x 60 x 19 mm Operating temperature -10°...
Consult your local waste management authority or a recycling organization like Earth911.com to find an ► electronics recycling facility in your area. If you are unable to locate proper recycling facilities in your area, please return this product to Uniden for ► recycling.
FCC Compliance Information Part 15 Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials & craftsmanship with only the limitations or exclusions set out below.