Switch The Bracket; Mount The Stand - Uniden UDW20055 Owner's Manual

Switch the bracket

If you want to mount the
camera in a hanging
position, you'll need to flip
the bracket to the top of
the camera:
1. Loosen the bolts on the
side of the mounting
bracket.
2. Carefully slide the
bracket off of the
camera and sun shield.
3. Rotate the bracket 180°
and slide it back onto
the camera.
4. If necessary, adjust the
camera angle, then
tighten the bolts.

Mount the stand

1. Hold the base of the camera stand
where you want to mount it, and
mark the location of the screw
holes.
2. Use the included screws and
anchors to attach the base to the
wall or ceiling.
3. Before attaching the camera, tug
gently on the stand to make sure it
is securely in place.
Flip the bracket upside Flip the bracket upside
2 2
down and slide it back down and slide it back
onto the camera. onto the camera.
Loosen the bolts Loosen the bolts
1 1
and slide the mounting and slide the mounting
bracket off of the camera. bracket off of the camera.
Adjust the camera to Adjust the camera to
3 3
the desired angle the desired angle
and tighten the bolts. and tighten the bolts.
7