Auto Run - Samsung SCP-3120 User Manual

Auto Run

►
Main Menu/Sequence Setting/Auto Run
If there is no controller operation by the user for a
certain time, the sequence operation designated by
the user will be executed.
•
Mode :
- HOME : Auto run Home Position (Refet to the
Preset Menu.)
-
PRESET : Auto run a selected preset number.
-
SWING : Auto run a selected Swing mode.
- GROUP : Auto run a selected Group mode.
- TOUR : Auto run a selected Tour mode.
- TRACE : Auto run a selected trace mode.
- A.PAN : Auto run a 360-degree pan. To activate
the panning command, you need to set
up the camera's tilt angle and auto pan
speed manually.
- SCHEDULE : Schedule a sequencing action by
day and time. Refer to the next
page.
•
Time :
Enables setting up an Auto Run duration. (The
duration can be 5~30 seconds, or 1~5 minutes.)
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
Auto Run
Mode OFF
Time 20 SEC
English English _ 67