Related Manuals for Samsung Techwin SCP-2270H
Summary of Contents for Samsung Techwin SCP-2270H
- Page 1 SPEED DOME CAMERA User Manual SCP-2370/SCP-2370H/SCP-2370TH/ SCP-2330/ SCP-2330H/ SCP-2270/SCP-2270H/ SCP-3370/ SCP-3370H/SCP-3370TH...
- Page 2 Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
- Page 3 If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifi cations or attempted repair.) When cleaning, do not spray water directly onto parts of the product. Doing so may cause fi re or electric shock.
- Page 4 safety information Keep out of direct sunlight and heat radiation sources. It may cause fi re. Install it in a place with good ventilation. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sensor.
- Page 5 important safety instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi...
- Page 6 CAUTION These servicing instructions are for use by qualifi ed service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualifi ed to do so. DETAILED WARNINGS AND CAUTIONS Avoid operating the camera for long durations under high temperatures and in high humidity.
- Page 7 When using Auto Track, it is recommended to adjust the tracking object size to 1/4 of the screen. This feature may not perform as expected depending on the situation and circumstances. Samsung Techwin is not responsible for injuries and fi nancial damage caused by the situation described above.
- Page 8 setting up auto track Two different Auto Track setup methods are available. Using Presets Select a starting point for Auto Track as a preset to activate Auto Tracking. (This can be used in conjunction with Group SEQ and Tour SEQ.) Using Target Lock Select an object on the screen to activate Auto Tracking.
- Page 9 Selecting Auto Track Starting Point 2 Preset Edit At Preset Edit, select the preset number under the Preset Preset = 001* (255) Settings menu. 001 : The selected preset is indicated with an asterisk (*). 021 : At Menu [After Action], select [Auto Track]. Preset Edit [001] Auto Track : Perform Auto Track upon arrival.
- Page 10 setting up auto track [ Auto Release ] [ Auto Return ] (10sec ~ 5min) (1sec ~ 5min) [ Lost Mode ] Start Finish Initial Tracking Tracking Location Performed only for the Auto Release duration <Auto Track Timing Chart> Auto Release: Command the camera to follow an object for a set duration and then return to its initial (preset) location.
- Page 11 Auto Tracking Using Group Command PSET : Using the joystick, enter a preset number under Group SEQ 1 which [After Act.] menu is set to [TRACK]. PSET DWT(s) SPD DWT : Indicates the camera time spent at each preset 001: *** : 003 : location.
-
Page 12: Table Of Contents
contents 13 Features INTRODUCTION 15 What’s included 16 Component Names and Functions (Indoor Model) 17 Component Names and Functions 18 Camera Wiring Interface Board CONNECTION & INSTALLATION 19 Camera and Appliances Wiring Diagram 21 How to Set Up Protocols and ID DIP Switches 22 Communication Protocol DIP Switch Settings (SW2) 25 Camera ID DIP Switch Settings (SW1) -
Page 13: Features
592/528/432 zoom. Versatile protocols and coaxial communication RS-422/485, Coaxial communication methods are supported. RS-422/485 (10 species) : Auto Detected, SAMSUNG-T, SAMSUNG-E, Pelco (D/P), Panasonic, Vicon, Honeywell, AD, GE, BOSCH Coaxial Communications : Pelco Coaxitron (automatic detection) - Page 14 introduction Preset Position Saving and Loading Up to 255 preset positions can be set. Using this function saves and brings up the camera feed of a selected monitoring location. Camera Backup This is to back up the camera’s sequence information and presets. This is useful when the camera or its install base are damaged or malfunctions occur.
-
Page 15: What's Included
WHAT’S INCLUDED Check if the following items are included in the product package. Applicable Appearance Item Name Quantity Description Model Indoor Model Main Body Environmental Model CD Manual Multilingual User Manual User Manual English User Manual If mounting the install base on the Fixing Screw ceiling If determining the installation... -
Page 16: Component Names And Functions (Indoor Model)
introduction COMPONENT NAMES AND FUNCTIONS (INDOOR MODEL) Front Back ➊ Bottom ➋ ❶ Unlock Button ❷ SW2: Communication DIP Switch ❸ SW1: ID DIP Switch ➍ Safety Cable Hook ➌ ➍ 16_ introduction... -
Page 17: Component Names And Functions
COMPONENT NAMES AND FUNCTIONS Front Back ➊ Bottom ➋ ➌ ➊ Safety Wire Holder ➋ SW2: Communication DIP Switch ➌ SW1: ID DIP Switch For the DIP switch settings, please refer to the “Installing Your Camera” on Page 21~25. English - 17... -
Page 18: Connection & Installation
connection & installation CAMERA WIRING INTERFACE BOARD For the camera wiring, please refer to the picture below. (When using coaxial communication, a separate control signal connection is not required.) Alarm 2.NC 2.NO Alarm Output 2 2.COM 2.NC Alarm Input 2.NO 2.COM Alarm Output 1 1.NC... -
Page 19: Camera And Appliances Wiring Diagram
CAMERA AND APPLIANCES WIRING DIAGRAM Connecting with Samsung Techwin’s “Stand Alone DVR” RS-485 : Camera Stand Alone DVR T(TXD)+ T(TXD)- RS-422 : Camera Stand Alone DVR T(TXD)+ T(TXD)- R(RXD)+ R(TXD)- Connecting with the Samsung Techwin Controller SPC-6000 RS-485 : Camera... - Page 20 & installation To connect to Samsung PC DVR RS-485 : Camera PC DVR SRP-1610/1650 connection & installation...
-
Page 21: How To Set Up Protocols And Id Dip Switches
HOW TO SET UP PROTOCOLS AND ID DIP SWITCHES You can control various settings of the camera system using the Communication and ID DIP switches. Before installing the product, please set up the DIP switches according to the installation environment. Detach the camera frame from the install base, and place the bottom of the frame toward you as shown in the picture below. -
Page 22: Communication Protocol Dip Switch Settings (Sw2)
Transfer Method (RS-485/422) Settings Response Mode Settings 9~10 Backup Mode Settings 11~12 Termination Settings Protocol Settings Select a communication protocol for the camera. Protocol SW2-#1 SW2-#2 SW2-#3 SW2-#4 Auto Detected Samsung-T Samsung-E Pelco-D Pelco-P Panasonic Vicon Honeywell Bosch connection & installation... - Page 23 Baud Rate Settings Select the transfer speed of a selected communication protocol. Baud Rate (BPS) SW2-#5 SW2-#6 2,400 4,800 9,600 19,200 Communication Method Settings Select a communication method for the camera. Function SW2- #7 Transfer Mode Switch RS-422 (4Wire) RS-485 (2Wire) Communication Response Settings Select a communication response method for the camera and controller: Response or No Response.
- Page 24 connection & installation Camera Backup Settings These settings are useful when the camera or its install base are damaged or malfunctions occur. When replacing the camera or its install base, you can transfer existing presets and sequence information to the replacement using these settings. Backup Function SW2- #9 SW2- #10...
-
Page 25: Camera Id Dip Switch Settings (Sw1)
CAMERA ID DIP SWITCH SETTINGS (SW1) Assign a unique number for each camera to identify itself from others. The initial value of the switch is “0”, and all of the 8 switches are defaulted to OFF. Each switch has a unique value, and the board ID is the sum of the values of the switches. - Page 26 connection & installation Camera ID Chart SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 ON/OFF connection & installation...
- Page 27 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 English - 27...
- Page 28 connection & installation SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 connection & installation...
- Page 29 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 English - 29...
- Page 30 connection & installation SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 connection & installation...
- Page 31 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 English - 31...
- Page 32 connection & installation SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 connection & installation...
-
Page 33: Preparing Adapter And Cables
PREPARING ADAPTER AND CABLES Power Adapter Power adapter has the capacity of AC24V 2.5A. Video Cable The camera’s video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp. -
Page 34: Product Configurations
connection & installation PRODUCT CONFIGURATIONS ALARM NETWORK BACKUP ZOOM TELE WIDE VIEW PRESET MODE AUDI DVD RECORDER OPEN/CLOSE RETURN RS-485 SRD Series ..ALARM NETWORK BACKUP ZOOM FREEZE BACKUP SEARCH TELE WIDE VIEW MODE AUDIO ALRAM MENU DVD RECORDER OPEN/CLOSE RETURN RS-485 SRD Series... -
Page 35: Preparing & Installing Camera Bracket
PREPARING & INSTALLING CAMERA BRACKET For installation guidelines for brackets and housings, refer to the installation manual that is enclosed with the bracket or housing. ❖ Available Bracket Models Model Item Indoor Model Environmental Model SHP-3700H Outdoor Housing SBP-300HM1 Hanging Mount SBP-300WM1 Wall Mount SBP-300WM... -
Page 36: Optional Accessories For Installation
connection & installation OPTIONAL ACCESSORIES FOR INSTALLATION For your easier installation, you can purchase appropriate optional accessories available. If installing the camera on the wall Wall mount (SBP-300WM1) Wall mount (SBP-300WM) If installing the camera on the ceiling Ceiling Mount (SBP-300CM) If installing the wall mount (SBP-300WM/SBP-300WM1) on an at least 80mm-long cylinder Pole Mount (SBP-300PM) - Page 37 If installing the wall mount (SBP-300WM/SBP-300WM1) on a corner of the wall Corner Mount (SBP-300KM) If installing on a building rooftop Parapet Mount (SBP-300LM) If installing an indoor model outdoors Outdoor Housing (SHP-3700H) If installing an indoor model on the ceiling Flush-Mount Indoor Housing for PTZ Dome Camera (SHP-3700F/STH-370PE) If installing an indoor model on the wall mount or ceiling mount...
- Page 38 connection & installation Bracket Mounting (Indoor Model) Wall mount (SBP-300WM) Wall mount (SBP-300WM1) Parapet Mount (SBP-300LM) Ceiling Mount (SBP-300CM) Bracket Mounting (Environmental Model) Wall mount (SBP-300WM1) Wall mount (SBP-300WM) Ceiling Mount (SBP-300CM) Parapet Mount (SBP-300LM) connection & installation...
-
Page 39: On-Ceiling Mount Type Installation Example
ON-CEILING MOUNT TYPE INSTALLATION EXAMPLE Attaching the template and installing the install base Attach the provided template on the ceiling. Based on the template, drill a 88mm hole in the ceiling and arrange the wires through the hole. Then, install the install base as shown. Before installing the exposed bracket, open the hinged door at the bottom of the bracket as shown in the picture. - Page 40 connection & installation Setting Up Camera DIP Switches DIP switches for communication and ID protocols are located on the bottom of the camera. For the switch settings, refer to the dip switch settings of this manual. ID (SW1) Protocol (SW2) Connecting Camera Safety Cable and Attaching Camera Carefully attach the camera to the mount following the alignment guide marks as shown in the picture.
- Page 41 ✽ To attach or detach the camera, refer to the picture. * Attaching the camera: Hold up the camera and push it to the mount as shown in the picture. Push the camera until you hear a “click”. * Detaching the camera: To detach the camera, pull the camera downward while pushing the unlock buttons on the camera upward.
-
Page 42: Example Of Installing An Environmental Model
connection & installation EXAMPLE OF INSTALLING AN ENVIRONMENTAL MODEL ❖ Fix the installation base with the bracket Fix the base with the bracket by turning it clockwise. As shown in the picture below, gently press and lift up the handle Knob of the hinged door on the bottom of the installation base. - Page 43 Assemble Camera and Installation Base Assemble the installation base and camera by matching the installation direction guides. Attach Camera Turn the camera frame counterclockwise until the protrusions on the camera frame and installation base become matched perfectly. Secure Camera and Installation Base As shown in the picture below, secure the installation base and camera using 3 hexagon screws.
-
Page 44: Setup
setup INTERFACE SYMBOLS Motion Detection Standby/Operation Display : When in standby mode, the “ ” in the upper right of the screen blinks and then changes to “ ” if motion is detected. Alarm Input Port Status Display : " ① ", " ② ", " ③ ", " ④ ", " ⑤ ", " ⑥ ", " ⑦ ", and " ⑧ " in the upper right of the screen blink. Current Alarm Port Display According to Input Alarm Ports(Priority) : Only one of "... -
Page 45: Using And Setting The Menus
For more detailed information about controls using a third party controller or a DVR, refer to the user’s manual of the product. OSD Commands, Function Chart, and Menu Controls (Applied to Samsung T/Samsung E protocol) This camera can be operated using two methods: Using hot keys on its dedicated controller, or accessing the OSD (On Screen Display) on the video output. -
Page 46: Osd Menu Chart
setup OSD Menu Chart You can have an overall view of the menu structure. For more information, refer to the applicable page or section in the manual. Zoom/Focus White Balance Exposure Back Light Camera Setting SSNR SSDR Day & Night Preset Others Swing SEQ... -
Page 47: Camera Setup
CAMERA SETUP Zoom and Focus Settings Focus Mode AUTO : Performs continuous auto-focus. MANUAL : Changes the camera mode to Manual Focus. Main Menu ONE SHOT : Auto-focuses the camera once after the Pan, Camera Setting Tilt, or Zoom function is used. Sequence Setting Zoom Tracking P/T Setting... - Page 48 setup White Balance The White Balance menu adjusts the balance of the screen colors Main Menu under different lighting conditions. Camera Setting ATW : Adjusts the screen color automatically. Sequence Setting (Color Temperature:1800~10500°K) P/T Setting INDOOR : Adjusts the screen color to be optimal in an indoor OSD Setting environment.
- Page 49 Exposure The Exposure settings are to control the camera’s exposure meter. Main Menu Brightness : Adjusts the screen brightness. Camera Setting (Over 50: Brighter, Under 50: Darker) Sequence Setting P/T Setting Iris AUTO : Automatically adjusts the exposure meter. OSD Setting MANUAL : Enables manual adjustment of the exposure meter.
- Page 50 Back Light The Backlight function is dedicated to SV-V DSP (SCP-3XX0) or W-V Main Menu DSP (SCP-2XX0) chip, developed by Samsung Techwin, which, unlike the old models, provides a sharp image of both object and Camera Setting background against a severe counter-light condition.
- Page 51 MODE : Select a mode that is suitable to the indoor or outdoor backlight condition. ANTI ROLLING : Reduces the difference of ambient colors to lessen the rolling that occurs under the fl uorescent lighting. WDR is disabled if the shutter is in Manual mode. ...
- Page 52 setup BLC Setting You can selectively choose a screen area to see objects within the MEDIUM area more clearly than others. Four-direction Joystick Controls : Moving the joystick in all four directions—upward, downward, left, and right—adjusts the location and size of a selected area. 1 + PST : Level Change Zoom Control : : Up : Down...
- Page 53 SSNR(Samsung Super Noise Reduction) SSNR significantly reduces the amount of low luminance noise. Main Menu OFF : Disables the noise reduction function. Camera Setting LOW : Reduces only a small amount of noise, but generates Sequence Setting almost no afterimage.
- Page 54 SSDR(Samsung Super Dynamic Range) SSDR illuminates darker spots of an image while retaining the same Main Menu light level for brighter spots to even out the overall brightness of the image with high contrast between bright and dark spots.
- Page 55 Day & Night The Day & Night function allows the camera to switch between the Main Menu Color and B/W modes. Camera Setting MODE Sequence Setting AUTO : Operates in Color mode most times, and switches P/T Setting to B/W mode if a low light level is detected during OSD Setting nighttime.
- Page 56 setup Others Sync : Select Internal or Line Lock (Not applied to SCP-XXXXT). INTERNAL : Synchronizes the camera’s output timing to the Main Menu internal crystal. LINE LOCK : Synchronizes the camera’s output timing to Camera Setting the AC adapter power to synchronize multiple Sequence Setting cameras.
-
Page 57: Sequence Setting
Sequence Setting Preset This function enables the memorization of a selected location and Main Menu activates the Pan, Tilt, and Zoom functions at that location. Saved Camera Setting locations can be recalled using the Preset Execute command. Sequence Setting Setting Up Preset Numbers : P/T Setting Selecting the Preset Setting menu brings up a screen as shown below. - Page 58 setup PTZF Setting If you open the PTZF setup menu, you will see the following Preset Setting window. You can use the joystick to select a desired number. Preset = 001 (1~255) Select a preset number and press ENTER. You will move 001 : to the setup screen.
- Page 59 Motion Detection / Intelligence (SCP-3370 Series) This will enable you to detect and trace a moving object. SCP-3370 series support the intelligent motion detection feature. For the compatibility of this feature, refer to the table below. Model Features Applied SCP-2370/2370H/2330/23370H/2270/2270H OFF / MD SCP-2370TH OFF / MD / AutoTrack...
- Page 60 setup Tracking : This will detect and trace a moving object. You can use the fence TRACKING function to count the moving objects. The default setting is the same as in the Detect menu, to which the Fence Position function Fence is added.
- Page 61 Preset Name Setting Using this function, you can add names to preset locations. Main Menu up to 12 characters. Camera Setting Once a name is entered, use the joystick and the Enter key to perform the Set command and save the name. Sequence Setting P/T Setting OSD Setting...
- Page 62 setup Home Position Preset Sets one of the currently configured preset positions as the home Setting position. Edit Home Position Execute Clear Status Execute Preset Recalls a saved preset location. Setting While in Sequence mode operation, the actual movement can Edit be slower than the specified when moving the camera in the Home Position...
- Page 63 Swing SEQ The Swing function commands the camera to move between 2 Main Menu selected locations, monitoring the route. Camera Setting Pan Swing : Sequence Setting Activates the Pan function for the Swing operation. P/T Setting OSD Setting Tilt Swing : Alarm Setting Activates the Tilt function for the Swing operation.
- Page 64 setup Group SEQ Selecting Group SEQ recalls a group of multiple preset locations in a Main Menu consecutive manner. Up to 6 groups can be defined and up to 128 presets can be memorized for each group. Camera Setting Sequence Setting Setting : P/T Setting Using the joystick,enter desired preset numbers into the PSET...
- Page 65 Tour SEQ Selecting Tour SEQ recalls groups of preset locations in a Main Menu consecutive manner. Up to 6 groups can be listed for this function. Camera Setting Setting : Sequence Setting Selecting the Settings menu brings up the following screen. P/T Setting Using the joystick, you can enter desired group numbers to the OSD Setting...
- Page 66 Swing SEQ Representative Stop saving the Group SEQ Protocol Model trace Tour SEQ PELCO-D/P KDB300A Ack, Iris Open PTZ Trace SAMSUNG-E SSC-5000 OSD ON, Iris Open Auto Run PANASONIC WV-CU161C OSD ON Power On Resume VICON V1300X-DVC Iris Open HONEYWELL...
- Page 67 Auto Run If there is no controller operation by the user for a certain time, the Main Menu sequence operation designated by the user will be executed. Camera Setting Mode : Sequence Setting HOME : Auto run Home Position (Refet to the Preset Menu.) P/T Setting PRESET : Auto run a selected preset number.
- Page 68 setup Schedule Auto Run Mode SCHEDULE Schedule enables you to schedule a sequencing action by day and time. Time 20SEC Select Day : At Auto Run, select SCHEDULE to set up each day of the week, as shown on the side picture. Select a day, change to ON, and Schedule Set then press Enter.
- Page 69 P/T Setting Pan/Tilt Limit The moving ranges in the Pan/Tilt directions can be limited. Main Menu Position : Camera Setting Selecting the Position menu brings up the following screen if it is Sequence Setting for the Pan Limit setting. Move the joystick left and right to select P/T Setting a movement range from the starting point to the end.
- Page 70 setup Area Setting The Area Setting menu enables selecting certain locations in the Main Menu course of the Pan and Tilt operation, and then display the areas with the OSD (On Screen Display) texts when the camera passes through Camera Setting them.
- Page 71 Area Masking If a monitoring location includes a highly private area, the area can be selectively excluded from monitoring. Main Menu Position : SCP-2XXX Series Camera Setting As shown in the picture below, move the joystick to select the upper Sequence Setting left corner and lower right corner of an area.
- Page 72 setup Prop. P/T This commands the camera to change the Pan and Tilt speed Main Menu automatically according to the current zoom ratio. Moving the joystick clockwise (Tele) slows down and counterclockwise (Wide) Camera Setting accelerates the Pan and Tilt speed, allowing detailed adjustments. Sequence Setting Turning this “Off”...
- Page 73 Digital Flip Digital Flip is useful to monitor a moving object or a person passing Main Menu directly under the camera. When the object passes straight under the camera, tilting can be Camera Setting traced up to the opposite tilting area without the need of the pan Sequence Setting operation.
- Page 74 setup Image Holding This will display the preset video in still images until the orientation Main Menu of the camera reaches the preset position at a group or tour movement. Camera Setting This is useful if you want to monitor the video while preventing a Sequence Setting possible visual distraction of the observer.
- Page 75 Auto Track (SCP-XXXXT) This function is to instruct the camera to track a moving object on the screen. Auto Track : Main Menu Auto Tracking ON/OFF : Turns on or off. Camera Height : Camera Setting Adjusts the height of the camera. Tracking performance may Sequence Setting decrease if the camera height is not adjusted properly.
- Page 76 setup Others : Here you can confi gure the settings of other options than Auto Track. Zone Setting : Position : Enables the designation of certain areas as zones for the Auto Track operation. The setting procedures are the same as for Area Mask. Mode : Two modes are available: Mask and Alarm.
- Page 77 Jog Speed You can adjust the speed of the pan or tilt operation. The pan/tilt speed changes according to the tilt of the joystick, or you can control the operation in a fixed speed. MANUAL : Main Menu The pan/tilt speed depends on how much the joystick of the controller is tilted.
- Page 78 setup Max Speed Level Adjusts the maximum speed of Pan and Tilt while performing the Preset and Sequencing actions. 1~7 : Main Menu Pan and Tilt operations can be set up to 600°/ sec. Camera Setting Preset speed for each level Sequence Setting Level Speed (Unit: º/sec)
-
Page 79: Osd Setting
OSD SETTING In this menu, you can configure the OSD (On Screen Display) settings. Camera ID : Main Menu Displays or hides Camera ID in the upper left of the screen. Camera Setting Camera Name : Sequence Setting Add a name to the camera. (First check the Note.) P/T Setting Preset Number : OSD Setting... -
Page 80: Alarm Setting
setup ALARM SETTING Alarm Enable Main Menu ON/OFF : Camera Setting Enables or disables the Alarm function. Sequence Setting P/T Setting OSD Setting Alarm Input Alarm Setting Initialize Password Setting Enables selecting an Alarm Input method. Status - NO (Normally Open) Alarm Setting IN 1.2.3..8 IN 1.2.3..8... - Page 81 P(Priority) : Set the priority of Alarm Inputs. If more than one alarm is simultaneously activated, the alarm with the highest priority activates before the others. Once the alarm is canceled, the next highest priority alarm activates. SEQ. : Enables setting up a sequence action for the camera in response to an alarm. You can configure the settings of: HOME/PRESET/SWING/GROUP/TOUR/TRACE/A.PAN/OFF Alarm Output Main Menu...
- Page 82 setup Connecting the power connector and GND incorrectly to the NC/NO and COM ports may cause a short circuit and fi re, damaging the camera. The maximum power capacity of the built-in relay is 30VDC/2A, 125VAC/0.5A, and 250VAC/0.25A. Operating the camera beyond the capacity may decrease the camera’s lifespan and damage it.
-
Page 83: Initialize
INITIALIZE Power On Reset : Main Menu Restarts the camera. Camera Setting Factory Default Set : Enables resetting the camera to its factory default settings. When Sequence Setting the mode is selected, all custom data such as preset locations is P/T Setting deleted from the camera. -
Page 84: Password Setting
DOME ID : DOME VER. = V0. 08-101023 Dome Camera ID COAX VER. = V0. 02-101207 TRACK VER. = V1. 14-101206 CONTROLLER : PROTOCOL = SAMSUNG-T Indicates the settings of the current communications mode. DOME ID = 001 CONTROLLER = Simplex setup... -
Page 85: Troubleshooting
troubleshooting TROUBLESHOOTING If the product does not function properly, please see the below for trouble shooting. Problem Cause and Solution Page ► Check if the camera and peripheral devices are properly connected. 18~20 Controller does not work. ► Verify the setups of ID, protocol, and baud rates. 21~32 ►... -
Page 86: Troubleshooting
troubleshooting Problem Cause and Solution Page ► Check the White Balance. ► Adjust Color Menu in Image Adj. Picture’s colors are not good. ► Check if the dome cover or the camera lens is dirty or smudged. If it is, clean the dirt off. ►... - Page 87 Problem Cause and Solution Page ► Check if the subject is in an area set of Area Masking. ► Check the Auto Release settings. Auto Release stops tracking a subject after a preset period of time, and 75~76 returns the initial position of the camera to track a new subject. Although The subject is moving, but Auto Tracking does not work.
- Page 88 troubleshooting Problem Cause and Solution Page ► When the camera’s internal temperature drops down to -20º or lower, it becomes unable to transmit video signals and may cause a black screen. I can’t see the screen. ► A black screen does not indicate camera breakage; it resets itself and (The screen is black.) starts displaying video again once its internal temperature reaches -20º...
-
Page 89: Product Specifications
product specifications PRODUCT SPECIFICATIONS (SCP-2XXX SERIES) Model SCP-2370TH SCP-2370H/2270H/2330H SCP-2370/2330/2270 1/4” Super HAD CCD II Image Device NTSC : 811(H) x 508(V) Total Pixels PAL : 795(H) x 596(V) NTSC : 768(H) x 494(V) Effective Pixels PAL :752(H) x 582(V) Scanning System 2:1 Interlace Synchronization... - Page 90 8 In 3 Out Communication RS-485, Coaxial Control Coax : Pelco-C ( Coaxitron ) Protocol RS-485: Auto Detected, SAMSUNG-T, SAMSUNG-E, Pelco(D/P), Panasonic, Vicon,Honeywell,AD,GE,BOSCH Operating Temperature -50°C ~ +50°C / Less than 90% RH -10°C~+50°C / 20~80% RH / Humidity Ingress Protection...
-
Page 91: Product Specifications (Scp-3370 Series)
PRODUCT SPECIFICATIONS (SCP-3370 SERIES) Model SCP-3370TH SCP-3370H SCP-3370 Image Device EX-view HAD CCD NTSC : 811(H) x 508(V) Total Pixels PAL : 795(H) x 596(V) NTSC : 768(H) x 494(V) Effective Pixels PAL :752(H) x 582(V) Scanning System 2:1 Interlace Synchronization Internal Internal / Line Lock... - Page 92 8 In 3 Out Communication RS-485, Coaxial Control Coax : Pelco-C ( Coaxitron ) Protocol RS-485: Auto Detected, SAMSUNG-T, SAMSUNG-E, Pelco(D/P), Panasonic, Vicon, Honeywell, AD, GE, BOSCH Operating Temperature -50°C ~ +50°C / Less than 90% RH -10°C~+50°C / 20~80% RH...
-
Page 93: Dimensions
DIMENSIONS ❖ Indoor Model Ø155 ❖ Environmental Model Ø148 Ø248 Ø244 Ø162 English - 93... - Page 94 MEMO...
- Page 95 MEMO...
- Page 96 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300, FAX : +44-1932-45-5325 www.samsungcctvusa.com...