Trace & Auto Run - Samsung SNP-3370 User Manual

Chapter 4. Using Web Viewer
4.2.2.4. Trace & Auto Run
PTZ Trace Setup
Category
Trace No. Up to 4 traces can be saved.
Replay Replays a route saved by the Trace function.
Pressing the Memorize button starts saving the route of the Pant/Tilt or Zoom/Focus
Memorize
operation automatically.
During Replay mode, press the Stop button to abort the Trace operation.
Stop
During Memorize mode, press the Stop button to finish memorizing a route.
Auto Run Setup
Category
Mode 8 modes are available: OFF, HOME, Preset, Swing, Group, Tour, Trace, and A.Pan.
Select time to activate Auto Run. (1 to 60 seconds and 1 to 60 minutes are
Time
available.)
In the HOME and Preset modes, Number is used to set up preset numbers.
In the Swing mode, Number is used to set up the Pan, Swing, and P&T modes.
Number In the Group and Trace modes, Number is used to set up groups and trace
numbers.
In the A.Pan mode, Number is used to adjust the Pan speed.
Available only in the A.Pan mode; enables a tilt angle to be set up for the Pan
Tilt Angle
operation.
Speed Available only in the A.Pan mode; enables to set the Pan operation speed.
Caution
camera like Preset, Group, Tour, etc.
NETWORK PTZ CAMERA
Description
Description
66
User Guide