installing your camera
3.
Connect the safety wire (attached to the camera) to the surface mount as shown. Then,
arrange the cables. (For more information about the wiring, refer to "Camera Wiring
Interface Board(17 Page)".)
4.
Arrange the cables inside the surface mount so that they should not be entangled or
stuck in, and align the guide rib of the camera with that of the surface mount. Use the
L-shaped wrench to tighten the screws (x4) so that the camera is secured to the
mount. To ensure waterproofness, take caution lest that the outer gasket should get
loose or be stuck in.
38_ installing your camera
SAFETY-WIRE
SURFACE MOUNT
MAIN-FRAME
GASKET
Guide Rib of SURFACE
MOUNT
Guide-Rib of MAIN-
FRAME
SCREW