Site Specifications; Kodak I800 Series Scanners - Kodak I810 - Scanner Firmware - PC Installation Planning Manual

Kodak i800 Series Scanners

Introduction

Site specifications

Layout considerations
A-61176 November 2001
The Kodak i800 Series Scanners are a new high speed, dual stream
scanning platform consisting of four different models providing
advanced image processing and superior throughput. The i800 Series
Scanners are designed to handle mixed document batches for any
production scanning workflow.
Four configurations are available:
Kodak i810 Scanner (bi-tonal)
Kodak i820 Scanner
Kodak i830 Scanner (bi-tonal)
Kodak i840 Scanner
This manual provides site specification and installation information for
the Kodak i800 Series Scanners (all models). Information that is
pertinent to a specific model will be noted.
Check that the designated site for the Kodak i800 Series Scanners
meets the following conditions and space requirements.
The following should be considered when selecting a site for the i800
Series Scanners:
Position the scanner to allow for:
Clearance space between other equipment and doorways.
A maximum distance of 5 feet (1.5 meters) from the scanner to
the power outlets.
Position the scanner away from:
Potential flooding and dampness areas, especially in basement
areas.
Open flame, excessively dusty areas or direct sunlight.
Any combustible or corrosive atmosphere caused by volatile
liquids or solvents.
Heat sources, such as windows, baseboard heating units, heat
ducts, space heaters, or any heat-generating equipment.
Transmitted interference, such as that generated by electronic
air cleaners, communication transmitters, radar (FAA and
military), or power lines.
Locate air conditioning outlets so the scanner will receive optimum
air circulation.
Establish an entry point for the SCSI cable to avoid laying it across
the floor or passageway.
Avoid carpets and any static-generating areas.
1