DiBos/DiBos Micro
Modifying camera or audio input settings
1.
2.
Removing grabbers, cameras or audio inputs
1.
2.
Configuring monitors
Adding network cameras
1.
2.
Modifying network camera settings
1.
2.
Removing network cameras
1.
2.
NOTICE!
–
–
–
–
–
–
Bosch Sicherheitssysteme GmbH
Select the camera or audio input in the connection overview.
In the Camera or Audio input section, click Edit. A dialog box for editing camera or audio
settings appears.
Select the components in the connection overview.
Click Remove in the appropriate section. The component is removed.
In the Monitors section, click Configure. A dialog box for configuring locally connected
monitors appears.
Select the designation Network in the connection overview.
In the JPEG IP cameras or MPEG4 IP cameras section, click Add. A network camera is
added.
Select the camera in the connection overview.
In the JPEG IP cameras or MPEG4 IP cameras section, click Edit. A dialog box for
modifying camera settings appears.
Select the camera in the connection overview.
In the JPEG IP cameras or MPEG4 IP cameras section, click Remove. The camera is
removed.
The system can automatically recognize built-in grabbers and directly connected
cameras.
A maximum of 5 grabbers can be built into one DiBos.
A maximum of 2 grabbers can be built into one DiBos Micro.
A maximum of 6 cameras and 2 audio inputs can be assigned to each grabber.
In addition to a VGA monitor, two video monitors can be locally connected.
The number of IP cameras depends on the extension level of the system.
Installation Guide
Default Configuration | en
F.01U.033.308 | V7 | 2009.09
43