Connecting The Dcf 77 Radio Clock - Bosch DB18C3100R2 Installation Manual

DiBos/DiBos Micro
9.8

Connecting the DCF 77 Radio Clock

To be carried out by authorized personnel only!
The radio clock is connected via a serial interface.
NOTICE!
Only the NeoClock DCF 77 radio clock may be used.
When retrofitting, the following installation must be carried out. Use the supplied installation
CD.
1.
2.
3.
4.
5.
Bosch Sicherheitssysteme GmbH
Connect the radio clock to the serial interface.
Log on as Administrator.
Select the interface.
– Select Start > Control Panel > System.
– Select the Hardware tab and click Device Manager.
– In the tree structure, open the entry Ports with a double click and select the
interface, e.g. Communications Port (COM1) with a double click.
– Select the Connection settings tab.
– Enter the settings for the interface:
Baud rate:2400
Data bits:8
Parity:None
Stop bits:2
Protocol:None
Confirmwith OK.
Radio clock installation
– Insert the installation CD.
– Call up Setup.exe in Windows® XP Explorer.
– Select Install server and click Next.
– Select the target directory for the program. Click Next, if you want to use the default
path or click Browse to select another one.
– Follow the on-screen instructions.
Once installed, configure the Time Synchronization program.
– Select Start > Control Panel > NeoClock Time Synchronization.
– Make the following settings in the configuration menu:
Language: German
Port: COM x (interface used)
Synchronization: Select Automatic
Installation Guide
Connections | en 137
1 Video system
2 COM x
3 Radio clock connecting
cable
4 DCF 77
F.01U.033.308 | V7 | 2009.09