Bosch DB18C3100R2 Installation Manual page 96

96 en | Default Configuration
Adding/processing remote stations
Remote stations menu > New button
In this dialog box, you determine remote station settings that enable connections to this
remote station to be established. Connection is possible via modem/ISDN and network.
1
2
NOTICE!
To configure a modem connection, an RAS-capable modem must be connected and an RAS
service installed. If no RAS-capable modem is connected or no RAS service is installed, a notes
icon and a button with additional information appears.
F.01U.033.308 | V7 | 2009.09
Designation
Number/Address
Modem/ISDN
Low bandwidth (live
mode)
Windows user account Make the Windows user account settings for modem/ISDN
User:
Change password
Reset user account
OK
Installation Guide
Enter a name for the remote station.
For a modem/ISDN:
Enter the complete telephone number of the remote station.
If your own workstation is connected to a PBX, you must
enter a prefix (in most cases 0) before entering the remote
station number.
For a network:
Enter the remote station IP address or the computer name.
Connect the remote station via a modem or ISDN.
In live mode, only every 30th image is displayed.
transmission.
If required, enter the user here. In the default settings, a user
has already been created.
The password can be changed as necessary. The password
must match that of the remote station.
Resets the user account.
The entries are saved.
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH