ENGLISH
Antenna terminals
An F-type FM antenna cable plug can be connected directly.
Direction of broadcasting station
FM antenna
75 Ω/ohms
Coaxial cable
FM indoor antenna
(supplied)
AM loop antenna assembly
Remove the vinyl tie and take
out the connection line.
a. With the antenna on top of
any stable surface.
Mount
AM loop antenna
(supplied)
AM outdoor antenna
Ground
Connect to the AM
antenna terminals.
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not
Bend in the reverse direction.
• Make sure the AM loop antenna lead terminals do not
b. With the antenna attached
to a wall.
Installation hole Mount on wall, etc.
Connection of AM antennas
1. Push the
2. Insert the
3. Return the
lever.
conductor.
lever.
NOTE
disconnect the AM loop antenna.
touch metal parts of the panel.
Note to CATV system installer:
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.