Audio Setup; Ext. In Subwoofer Level; S 2Ch Direct/Stereo; Dolby Digital Setup - Denon AVR-2309CI Owner's Manual

ENGLISH

Audio Setup

Make settings for audio playback.
F Menu screen F
2.Manual Setup
2-3.Audio Setup
1.Speaker Setup
2.HDMI Setup
1.EXT.IN SW Level
3.Audio Setup
2.2ch Direct/Stereo
4.ZONE2 Setup

3.Dolby Digital Setup

5.Option Setup

4.Auto Surround Mode

5.EQ Preset
a EXT. IN Subwoofer Level
Set the subwoofer level for playback.
[Selectable items] 0dB +5dB
We recommend setting to "+15dB".
s 2ch Direct/Stereo
Make speaker settings for 2-channel mode playback.
Setting
To change the settings, select "Custom".
[Selectable items]
Basic
: Use the same settings as in "Speaker Setup".
Custom
: Make separate settings for 2-channel mode.

For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 22).
Front
Select front speaker size.
[Selectable items]
Large Small
Subwoofer
Select subwoofer use.
[Selectable items]
Yes No
Subwoofer Mode
Select low range signal to be reproduced by subwoofer.
[Selectable items]
LFE LFE+Main
+10dB +15dB
Crossover
Select crossover frequency from which subwoofer handles low range
signal.
[Selectable items]
40Hz 60Hz
200Hz 250Hz
Distance FL
Set distance from listening position to front left speaker.
[Variable range]
Distance FR
Set distance from listening position to front right speaker.
[Variable range]
NOTE
Set the distance between the listening position and the various
speakers to no more than 20.0 ft (6.00 meters).
: Select front speaker size.
: Select subwoofer use.
: Select subwoofer signal.
80Hz 90Hz 100Hz 110Hz 120Hz 150Hz
: Select crossover frequency.
0.0ft ~ 60.0ft
0.0ft ~ 60.0ft
d Dolby Digital Setup
Set dynamic range for downmix playback of Dolby Digital
sources.
[Selectable items]
ON
: Compression is used. Select this if sound from front
speakers is distorted.
OFF
: Do not use compression. This is the recommended
setting.
• Set this to "ON" if the sound from the front speakers seems
distorted.
• When not using the center speaker or surround speakers, the
playback sound is down-mixed and output from the front speakers.
f Auto Surround Mode
Make setting for memorizing surround mode setting for each
input signal type.
[Selectable items]
ON
: Memorize settings. Most recently stored surround mode is
automatically selected.
OFF
: Do not memorize settings. Surround mode does not change
according to input signal.
• The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals
listed below.
q Analog and PCM 2-channel signals
w Dolby Digital and DTS 2-channel signals
e Dolby Digital and DTS multi-channel signals
r Multi-channel signals other than Dolby Digital and DTS (PCM,
etc.)
• When playing in the PURE DIRECT mode, the surround mode does
not change even if the input signal is changed.