Playing Video And Audio Equipment; Basic Operation; Listening To Fm/Am Broadcasts - Denon AVR-2309CI Owner's Manual

ENGLISH
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
<SOURCE SELECT> SHIFT
BAND TUNING
[Front]
SOURCE SELECT
SHIFT
TUNING
[CHANNEL+/–]
[SOURCE
CONTROL 1]
[Rear]
SOURCE SELECT
TUNING
[MODE]
[MEMORY]

Playing Video and Audio
Equipment
BUTTON
<BUTTON>

Basic Operation

[BUTTON]
1
Prepare the equipment.
<PRESET>
q Load the BD, DVD, CD or other software in the player.
(vSee the operating instructions of the respective equipment.)
w To play a video equipment, switch the monitor input.
(vSee the monitor's operating instructions.)
2
SOURCE SELECT
Use
3
Start playback.
(vSee the operating instructions of the respective equipment.)
The remote control unit can be used to operate external devices.
See "Remote Control Unit Operations" (vpage 65).
[TUNER]
[SOURCE
CONTROL 2]
[TUNER]
BAND

Listening to FM/AM Broadcasts

Basic Operation
1
2
3
to select the input source.
4
q To tune in automatically (Auto Tuning)
Press
use
w To tune in manually (Manual Tuning)
Press
TUNING
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold
frequencies continuously.
• The time for which the on-screen display are displayed can be set at
"Manual Setup" – "Option Setup" – "On-Screen Display" (vpage
36).
<SOURCE SELECT>
Either turn or press
select "TUNER".
[SOURCE CONTROL 1]
Set to "AUDIO" and
CONTROL 2]
to "TUNER".
(vpage 65 "Remote Control Unit Operations")
BAND
Press to select "FM" or "AM".
Tune in the desired broadcast station.
[MODE]
to light the "AUTO" indicator on the display, then
TUNING
to select the station you want to hear.
[MODE]
to turn off the display's "AUTO" indicator, then use
to select the station you want to hear.
[TUNER]
to
[SOURCE
TUNING
to change