Programs; Storing A Program - Ricoh Aficio MP W3600 Operating Instructions Manual

Programs

You can store frequently used copy job settings in the machine memory and re-
call them for future use.
You can store up to 10 programs.
Note
❒ When a specified program is registered as the default, its values become the
default settings, which are displayed without pressing the {Program} key,
when modes are cleared or reset, and after the operation switch is turned on.
See "Registering Defaults in Initial Display".
❒ Paper settings are stored based on paper size. So if you place more than one
paper tray of the same size, the paper tray prioritized with User Tools (Sys-
tem Settings) will be selected first. See "Tray Paper Settings", General Settings
Guide.
❒ Programs are not deleted by turning the power off or by pressing the {Clear
Modes} key.
Reference
p.129 "Registering Defaults in Initial Display"
"Tray Paper Settings", General Settings Guide

Storing a Program

Stores a program.
A
Edit the copy settings so all functions you want to store in this program are
selected.
B
Press the {Program} key.
ATY057S
Programs
2
125