Copying
E
Adjust the original guides to the width of the original, and then place the
original face down.
The original feeds into the machine automatically, and copying starts. The
scanned data is also stored in the memory.
Note
❒ To stop scanning, press the {Clear/Stop} key. To resume a paused scanning
2
job, press [Continue] in the confirmation display. To delete scanned images
and cancel the job, press [Stop].
❒ Press the {q} key after all the originals have been scanned.
❒ Data stored in the Document Server is set to be deleted after three days by
the factory default. You can specify the period after which the stored data
is deleted automatically. For details about changing settings, see "Admin-
istrator Tools", General Settings Guide.
❒ To check if the document has been stored, press the {Document Server} key.
❒ If you want to store another document, do so after copying is complete.
❒ For details about the Document Server, see "Using the Document Server".
❒ For details about printing stored documents, see "Printing a Stored Document".
❒ For details about setting user name, file name, and password, see "Storing
Data".
❒ Depending on the security setting, [Access Privileges] may appear instead
of [User Name]. For details about specifying [Access Privileges], consult the
administrator.
Reference
p.136 "Using the Document Server"
p.136 "Storing Data"
p.146 "Printing a Stored Document"
"Administrator Tools", General Settings Guide
124