Ricoh Aficio MP W3600 Printer Reference page 37

Note
❒ For TCP/IP, timeout setting can be configured.
❒ User, proxy, and timeout settings can be configured for IPP.
❒ If no settings on the [Recovery/Parallel Printing] tab are available, follow the
procedure below.
A Click [Cancel] to close the [Port Configuration:] dialog box.
B Start SmartDeviceMonitor for Client, and then right-click the SmartDe-
viceMonitor for Client icon on the tasktray.
C Point to [Properties], and then click [Extended Features Settings].
D Select the [Set Recovery/Parallel Printing for each port] check box.
E
Click [OK] to close the [Extended Features Settings] dialog box.
Reference
"Using SmartDeviceMonitor for Client", Network Guide
SmartDeviceMonitor for Client Help
Installing the Printer Driver
1
29