Component With Multi-Channel Output Connectors; Antenna Terminals - Denon AVR-1509 Owner's Manual

Component with Multi-channel Output
Connectors
Select the terminal to use and connect the device.
DVD player / External decoder
R R
L L
R R
L L
• To play the analog input signals input to the EXT. IN connectors,
INPUT MODE
press the button on the main unit or the
on the remote control unit and select "EXT. IN" (vpage 30).
• The video signal can be connected in the same way as a DVD player
(vpage 10).
• To play copyright-protected discs, connect the AVR-1509's EXT.
IN connector with the DVD player's analog multi-channel output
connector.

Antenna Terminals

An FM antenna cable plug can be connected directly.
AM loop antenna
(supplied)
AM outdoor
Ground
antenna
INPUT
button
n AM loop antenna assembly
Direction of broadcasting station
FM antenna
75 Ω/ohms
Coaxial cable
Mount
FM indoor
antenna
(supplied)
Installation hole Mount
on wall, etc.
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the AM
• Make sure the AM loop antenna lead terminals do not touch metal
Remove the vinyl tie and take out
the connection line.
Bend in the reverse direction.
a. With the antenna on top of any
stable surface.
b. With the antenna attached to a
wall.
Connection of AM antennas
1. Push the lever. 2. Insert the conductor. 3. Return the lever.
NOTE
loop antenna.
parts of the panel.
ENGLISH