HP 300X - JetDirect Print Server Administrator's Manual page 78

Table 7.2 General HP Jetdirect Messages (10 of 10)
Message
UNABLE TO LOGIN
UNABLE TO SENSE NET
NUMBER
UNABLE TO SET
PASSWORD
UNDERFLOW ERROR
UNEXPECTED
PSERVER DATA RCVD
UNKNOWN NCP
RETURN CODE
78 HP Jetdirect Configuration Page Messages
Description
A failure was detected when the HP Jetdirect print server
tried to log onto the file server. This could be caused by
the print server object not existing on the file server, or
because of a security check that prevents the print server
from logging in.
Make sure the file server name and print server object
name are correct. Use PCONSOLE to erase the password
for the print server object. Create a new print server object.
When the HP Jetdirect print server is configured for
multiple file servers, the error is only displayed on the
configuration page if none of the file servers made the
connection.
The HP Jetdirect print server has been trying for over 3
minutes to determine the NetWare protocol used on the
network. Make sure that any file servers and routers are
operating correctly. Make sure that the settings for
NetWare frame type and source routing are correct.
A failure was detected when the HP Jetdirect print server
tried to set the password for the print server object.
(Whenever the HP Jetdirect print server is able to log in
without a password, it sets the password automatically.)
This indicates a networking or security problem. Create a
new print server object.
When multiple file servers are configured, the error is only
displayed on the configuration page if none of the file
servers were successfully connected.
Check the cabling and connectors. If the error persists, run
the power-on self-test: turn the print server off, then on
again. If the error persists, replace the HP Jetdirect print
server.
The HP Jetdirect print server received data without
providing permission to do so. This indicates a possible
software problem.
The HP Jetdirect print server encountered an unexpected
fatal error after it had successfully connected to the file
server. A wide variety of failures could produce this error
message, including a downed file server or a network
router failure.
ENWW