HP 300X - JetDirect Print Server Administrator's Manual page 81

Table 7.4 Novell NetWare Configuration Messages (2 of 2)
Message
PORT X STATUS:
SERVER NAME:
NETWORK
XXXXXX
FRAME TYPE
XXXXX
RCVD
XXXX
Table 7.5 DLC/LLC Configuration Messages
Message
DLC/LLC STATUS:
SERVER ADDRESS:
ENWW
Description
READY: Print server is awaiting data.
INITIALIZING: Print server is registering the node address
or name/type.
The name of the NetWare file server or print server. If no
name is displayed, the Jetdirect print server has not been
configured.
If the message "UNABLE TO FIND FILE SERVER" appears
in the "IPX/SPX STATUS:" section of the configuration page,
the SERVER NAME field identifies the Jetdirect discovery
method [NSQ] (Nearest Service Query) or [GSQ] (General
Service Query) and the name of the proxy file server used
to locate the configured bindery servers.
The first column indicates the network number associated
with the protocol frame type for communication between
server and printer. Unless a specific frame type has been
manually configured, the print server automatically
determines the protocol frame type by listening to the
NetWare data being transferred over the network. If
UNKNOWN is listed, the HP Jetdirect print server is still
trying to determine which network number to use. If the
network number is DISABLED, a specific frame type has
been manually configured. The Frame Type value can be
EN_8023, EN_8022, EN_II, or EN_SNAP. The RCVD count
indicates how many packets have been received for each
frame type.
Description
Current DLC/LLC status:
DISABLED: Indicates that DLC/LLC was manually disabled
through the printer's control panel (if available).
DISABLED: Indicates that LAN Server was manually
disabled through the printer's control panel (if available).
READY: Indicates the HP Jetdirect print server is awaiting
data.
NOT IN USE: Code is in the middle of a download.
Station address of the remote end of the connection.
HP Jetdirect Configuration Page Messages 81