Optra Plus, 4039, 4029, 4019, Winwriter 600 Printers - Lexmark Dot Matrix Manual

Card stock and label guidelines
When printing on labels:
•
Set the paper type to Labels in the Paper Menu.
•
Do not use label sheets with a slick backing material.
• Do not print within 1 mm (0.04 in.) of the die-cut, the edge of the label or the perforations, or between the die-
cuts.
•
Use full label sheets. Partial sheets may cause labels to peel off during printing and result in a paper jam.
•
Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive
at least 1 mm (0.04 in.) away from the edges. Adhesive material may contaminate your printer and could void your
warranty.
When printing on card stock:
• Use grain long card stock, and set the paper type to Card Stock.
•
Do not use creased card stock. It may cause paper jams.

Optra plus, 4039, 4029, 4019, WinWriter 600 printers

The following table lists the maximum weights supported by each of the special card stock and label trays, as well as
the manual feed tray.
Overview of card stock and label support
Paper source
200-sheet heavy duty tray
500-sheet tray (450 grams)
500-sheet tray (550 grams)
500-sheet tray (650 grams)
500-sheet tray (750 grams)
Manual feed tray
For paper and transparency specifications, see your printer User's Guide.
Card stock
Index Bristol Tag
2
163 g/m 163 g/m
2
—
90 g/m
2
135 g/m 135 g/m
2
163 g/m 163 g/m
2
199 g/m 203 g/m
2
253 g/m 241 g/m
Printer specifications
127
Cover Paper
2 2
176 g/m 150 g/m
—
2 2
135 g/m 165 g/m
2 2
176 g/m 175 g/m
2 2
216 g/m 180 g/m
2 2
285 g/m 263 g/m
Labels
Vinyl
2 2
265 g/m
— —
2
—
2 2
300 g/m
2 2
300 g/m
2 2
300 g/m