Copying Printer Settings To Other Printers - Lexmark MS310 series User Manual

Managing the printer
Notes:
•
Print a network setup page or menu settings page, and then locate the printer IP address in the
TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as
123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Print Settings > Supply Notifications.
3
From the drop‑down menu for each supply, select one of the following notification options:
Notification
Off
E‑mail Only
Warning
1
Continuable Stop
Non Continuable Stop
1
The printer generates an e-mail about the status of the supply when supply notification is enabled.
2
The printer stops when some supplies become empty to prevent damage.
4
Click Submit.

Copying printer settings to other printers

Note: This feature is available only in network printers.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP
section. The IP address appears as four sets of numbers separated by periods, such as
123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click the Copy Printer Settings tab.
3
If you want to change the language, then select a language from the drop‑down menu, and then click Click
here to submit language.
4
Click the Printer Settings tab.
5
Type the IP addresses of the source and target printers in their appropriate fields.
Note: If you want to add or remove a target printer, then click Add Target IP or Remove Target IP.
6
Click Copy Printer Settings.
Description
The normal printer behavior for all supplies occurs.
The printer generates an e-mail when the supply condition is reached. The status of
the supply appears on the menus page and status page.
The printer displays a warning light sequence and generates an e-mail about the
status of the supply. The printer does not stop when the supply condition is reached.
The printer stops processing jobs when the supply condition is reached. The user
needs to press a button to continue printing.
1,2 The printer stops when the supply condition is reached. The supply must be replaced
to continue printing.
90