Optra E310, E312 - Lexmark Dot Matrix Manual

Optra E310, E312

Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using
vinyl or polyester labels.
The Optra E310 and Optra E312 support stocks up to 163 g/m
10 sheets of card stock or labels.
The following table lists the maximum weights supported by the automatic paper feeder and the multipurpose feeder.
Overview of card stock and label support
Paper Source
Automatic Paper Feeder
Manual Sheet Feeder
For paper and transparency specifications, see the printer User's Guide.
Media specifications
Labels Width:
Length:
Weight:
Thickness:
Smoothness:
* 150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock Weight:
Note: Always use the front exit when printing on card stock. To minimize curl, use the front exit when printing on labels.
For more information, see "Maintenance procedures" on page 13.
2
(43 lb). The automatic paper feeder can hold up to
Card Stock
Index Bristol Tag
2
163 g/m 163 g/m
2
163 g/m 163 g/m
210–216 mm (8.3–8.5 in.)
279–297 mm (11–11.7 in.)
2
Up to 163 g/m (43 lb)
Up to 0.25 mm (0.01 in.)
100–400* Sheffield
2
Up to 163 g/m Index Bristol (90 lb)
2
Up to 163 g/m Tag (100 lb)
Printer specifications
135
Cover Paper
2 —
163 g/m
2
—
163 g/m
Labels
Vinyl
2 —
2
—