Optra K 1220 - Lexmark Dot Matrix Manual

Tray specifications
Source Print media
Tray 1 Paper
Labels
1,2
Card stock
Envelopes (20 lb)
Transparencies
Tray 2 Paper
Manual All supported media
1
Card stock weights may vary ± 5%.
2
110 lb Index recommended for applications using only solid black lines, text, or area fills. Applications using gray scales
may have unpredictable results.
For more information, see "Maintenance procedures" on page 13.

Optra K 1220

Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using
vinyl or polyester labels or any card stock with the Optra K 1220 printer.
Always feed labels from the manual feed tray or the optional multipurpose feeder. The multipurpose feeder can hold
up to 30 sheets of labels.
The following table lists the maximum weights supported.
20 lb bond
24 lb bond
Paper
Vinyl
Dual Web Forms
Integrated Forms
2
Index 163 g/m (90 lb)
2
Index 199 g/m (110 lb)
2
Tag 163 g/m (100 lb)
20 lb bond
24 lb bond
Printer specifications
Maximum stack
height Input capacity
15 mm (0.6 in.) 150 sheets
15 mm (0.6 in.) 100 sheets
13 mm (0.5 in.) 70 sheets
13 mm (0.5 in.) 35–50 sheets
13 mm (0.5 in.) 50–60 sheets
7 mm (0.3 in.) 35 sheets
7 mm (0.3 in.) 30 sheets
7 mm (0.3 in.) 30 sheets
13 mm (0.5 in.) 10 envelopes
2.5 mm (0.1 in.) 10 sheets
25 mm (1 in.) 250 sheets
25 mm (1 in.) 150 sheets
—
137
Output capacity
100 sheets
100 sheets
70 sheets
35–50 sheets
50–60 sheets
35 sheets
1 sheet
30 sheets
10 envelopes
10 sheets
250 sheets
150 sheets
1 sheet 1 sheet