Table of Contents
Advertisement
Measurement scaling for parts that expand or
shrink
Scale factors scale measurement results using a multiplier and are
useful when measuring parts that will expand or shrink after
inspections have been performed.
Scale Factor screen
The Scale Factor screen contains configuration fields for:
Enabling scale factor
Specifying a scale factor multiplier value
Providing the user access to scale factor editing
To configure scale factor settings:
U
Press MENU/SETUP to display the setup menu and then highlight
the Scale Factor menu item.
The setup process for all axes is identical and uses the
Encoders and Misc setup screens.
U
Highlight the Multiplier data field and enter the scale factor
multiplier.
U
Highlight the User Settable choice field and press the NO soft key
to restrict access to those who can provide the supervisor
password, or the YES soft key to provide unrestricted access.
Password restricted access to setup parameters is
explained earlier on page 87.
U
Highlight the Active choice field and press the NO soft key to disable
the scale factor or the YES soft key to enable it.
Enter the scale factor multiplier
U
Press the FINISH key to return to the setup menu.
ND 1200 QUADRA-CHEK
Select NO to restrict access or YES to
allow user access to scale factor editing
Select NO to disable or YES to enable
scale factor
111
Advertisement
Table of Contents
