Table of Contents
Advertisement
The functions contained in the Special menu are shown here:
The selection of a language can be assigned to a hot key.
Individual languages appear in the Special menu but are
not shown separately in this list of hot key functions.
Special menu function
Annot
Auto E
Clr All
Clr Ft
Clr Sk
DMS/DD
MCS
MinMax
Probe
Preset
Preset!
Prog
Prt RS
Prt USB
Run!
Send 2, 3, 4
Send D
Send F
Send L
Send Q
Send r
Send X
Send Y
Send Z
Send <
120
Description
Toggles between forward and backward annotation probing
Toggles between manual and automatic edge detection probing
Clears the feature list, skews and datums
Clears features from the features list
Clears the skew part alignments and datums
Toggles the display of angles between degrees, minutes and seconds and decimal degrees.
Clears datums and reestablishes machine coordinates.
Displays the maximum and minimum encoder count on the selected axis. An absolute range
(from the minimum to maximum) is displayed as well.
Toggles the probe selection between crosshairs and (optional) optical edge detection.
Presets datums to user specified values that correspond to known part coordinates such as
dimensions specified by a part drawing.
Repeats the last preset datum performed.
Displays a list of prerecorded programs for selection by the user.
Sends data for the current print request to the RS-232 serial port
Sends data for the current print request to the USB port
Runs the last program again.
Sends the current X-Y, X-Y-Z or X-Y-Z-Q axes data to a printer or computer.
Sends the current diameter data to a printer or computer.
Sends the current form error data to a printer or computer.
Sends the current length data to a printer or computer.
Sends the current protractor Q-axis data to a printer or computer.
Sends the current radius data to a printer or computer.
Sends the current X-axis data to a printer or computer.
Sends the current Y-axis data to a printer or computer.
Sends the current Z-axis data to a printer or computer.
Sends the current angle measurement data to a printer or computer.
2 Installation and Specifications
Advertisement
Table of Contents
