Microsoft Printing - Intel PCLA4251B - Netportexpress Pro Enet EXT 10BT Single Port Setup Manual

Microsoft Printing

To set up printing, first configure the print server and then set up each PC to
print. To configure the print server, use the Config Wizard in Netport Manager.
Then run the NetportExpress Add Printer Wizard on each PC to set up printing
to the print server. The NetportExpress Add Printer Wizard installs software that
enhances Windows' retry mechanisms for network printers and sets up the PC
to print.
For information about setting up printing with Windows NT 3.51, Windows for
Workgroups, OS/2, LAN Server*, or LAN Manager*, see the NetportExpress
print server Online Guide.
Direct printing
Direct printing allows workstations on
the network to send print jobs directly to
a print server without going through an
intermediate server. Run the
NetportExpress Add Printer Wizard on
each Windows PC in order to facilitate
direct printing to the NetportExpress
print server.
Shared printing with a server
Each user prints to a shared printer on a
single system. The computer spools the
print jobs and sends them to the
NetportExpress print server. To set up
shared printing with a Windows 2000 or
Windows NT 4.0 server, run the
NetportExpress Add Printer Wizard on
the server, and share the printer with
other Windows PCs. The server spools
the print jobs and sends them to the
NetportExpress print server.
NetportExpress
print server
Windows NT
server
6
NetportExpress
print server