Specifications For Netportexpress Pro Token Ring Print Servers - Intel PCLA4251B - Netportexpress Pro Enet EXT 10BT Single Port Setup Manual

Specifications for NetportExpress PRO token
ring print servers
Network topology support
G Autosenses between token ring STP Type 1 and UTP Type 3 connectors
G Supports both 4 Mbps and 16 Mbps ring speeds
G Supports source routing
G Supports Locally Administered Addresses (LAA)
Protocols
G NetBEUI: SMB-NBF
G IPX/SPX: auto-senses the IPX frame type (802.2, 802.3, Type II, or SNAP)
G TCP/IP: BOOTP, RARP, DHCP, HTTP, SNMP, LPR, FTP
G AppleTalk: EtherTalk or TokenTalk (AppleTalk zone and router required)
Port specifications
G 2 bidirectional parallel ports
G 25-pin female connector (IEEE 1284-compliant)
G 1 RS-232C serial port, 9-pin male connector
Hardware
G Dimensions: 7.25 x 5.13 x 1.25 inches (18.4 x 13.02 x 3.17 cm)
G Weight: 13 ounces (370 grams)
G Power supply: 110VAC or 240VAC input. 14VAC, 700 mA output
G Emissions: FCC and CISPR-22 class A
Management options
Windows Netport Manager, Web Netport Manager, Web Enterprise Netport
Manager, Intel Device View, Telnet, and SNMP (MIB-II)
28