Novell Printing; Setting Up To Print With Novell Print Server - Intel PCLA4251B - Netportexpress Pro Enet EXT 10BT Single Port Setup Manual

Novell Printing

NetportExpress print server supports printing with NDPS, bindery print server
mode, or remote printer mode.
NDPS
In TCP/IP environments, NetportExpress print servers support NDPS 2.0 and
higher through LPR. NDPS is bundled with NetWare 5.0 or is available as an
add-on product from Novell for NetWare 4.11 as NetWare Enterprise Print Ser-
vices (NEPS). To print NDPS using IPX* (queue-based printing), see the
Online Guide.
Novell print server
The NetportExpress print server performs the function of the Novell print server
and polls the Novell file server queue for print jobs. This is a fast printing mode
that requires one NetWare user license per print server. Netport Manager creates
any queues or print servers you need for your NetWare setup. You don't have to
create these objects in NWADMIN or PCONSOLE.
Novell remote printer
If you are already using PSERVER.NLM, you can set up a NetportExpress print
server as a remote printer. For information on remote printer configuration, see
Novell remote printer in the Online Guide index. For best performance, use
Novell print server mode, NDPS, or LPR printing.

Setting up to print with Novell print server

To set up printing with NDS or bindery print server, configure the
NetportExpress print server and then set up each PC to print to the print queue
you assigned.
Configure the NetportExpress print server
1 Log in to Novell as Admin, Supervisor, or the equivalent at the workstation
where you installed Netport Manager.
2 Start Netport Manager and select the print server. Match the Device ID in
Netport Manager with the Device ID located on the bottom of the print
server. If the device is not listed, see Troubleshooting on page 21.
3 Click the Config Wizard button.
4 Follow the directions in the wizard for Novell NDS or bindery print server.
10