Quick Start For Software - Intel PCLA4251B - Netportexpress Pro Enet EXT 10BT Single Port Setup Manual

Quick Start
for Software
2
Install Netport
1 Insert the NetportExpress Print Server CD into a Windows PC. If the
program doesn't automatically start, run setup.exe from the CD. From
the Start menu, click Run and browse to the CD drive.
2 Click Install Netport
Note: If you are using UNIX and do not have a Windows computer, see
Configuring the print server on page 14.
3
Configure the print server
1 Start Netport Manager and select the print server. Match the Device ID
in Netport Manager with the Device ID located on the bottom of the
print server. If the device is not listed, see Troubleshooting on page 21.
2 Click the Config Wizard button and follow the instructions in the
wizard.
®
Manager
®
Manager.
4