–
Split tunnel – Sends only traffic destined for the internal network based on the specified
client routes. All other traffic is sent to the internet. Split tunnel allows you to manage
your company bandwidth by reserving the VPN tunnel for corporate traffic only.
Beyond what is defined in
some specific operating requirements. For
•
Mac OS. VPN Tunnel supports Version 1.4 (Tiger).
•
Browsers. The Firefox browser supports only VPN tunnel, VNC, Network places and Utilities
(IE is required for Port Forwarding, Applications, and Terminal Services).
Adding IP Address Ranges
Determine the address range you will assign to VPN Tunnel Clients, then define the address range
in the SSL VPN Concentrator administrative interface.
To configure the SSL VPN Tunnel client address range:
1. Under Access Administration in the left navigation pane, select VPN Tunnel. The VPN Tunnel
Client screen displays.
Figure 6-1
Configuring the SSL VPN Tunnel Client and Port Forwarding
NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
"Web Browser Requirements" on page
v2.1, November 2008
1-2, the VPN Tunnel Client has
6-3