Table of Contents
Advertisement
Querying an LDAP Server
To query your LDAP or Active Directory server to find out the LDAP attributes of your users, you
can use several different methods. From a machine with LDAPsearch tools (for example a Linux
machine with OpenLDAP installed), run the following command:
ldapsearch -h 10.0.0.5 -x -D
cn=demo,cn=users,dc=netgear,dc=net -w demo123 -b
dc=netgear,dc=net > /tmp/file
where
•
10.0.0.5 is the IP address of the LDAP or Active Directory server
•
cn=demo,cn=users,dc=netgear,dc=net is the distinguished name of an LDAP
user
•
demo123 is the password for the user demo
•
dc=netgear,dc=net is the base domain that you are querying
•
> /tmp/file is optional and defines the file where the LDAP query results will be
saved.
For further information on querying an LDAP server from a Window server, please see:
http://www.microsoft.com/technet/prodtechnol/windowsserver2003/library/TechRef/8196d68e-
776a-4bbc-99a6-d8c19f36ded4.mspx
Configuring for LDAP Authentication
To configure LDAP authentication, click Add Domain. An Add Domain window displays. In the
Add Domain window:
1. From the Access Administration menu, select Domains. The Domains window will display.
Click Add Domain.
2. From the Authentication Type menu, select LDAP. The Add Domain Window displays the
fields for a domain with LDAP authentication:
Authenticating Users
NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
v2.1, November 2008
3-9
Advertisement
Table of Contents
