Table of Contents
Advertisement
Figure 3-3
3. In the Domain Name field, enter a descriptive name for the authentication domain. This is the
domain name users will select in order to log into the SSL VPN portal.
4. In the Radius Server Address field, enter the IP address or domain name of the Radius server.
5. If an authentication secret is required by the Radius server, enter it in the Secret Password
field.
6. From the Portal Layout Name drop-down menu, select the name of the layout. The default
layout is SSL-VPN. You can define additional layouts in the Portal Layouts page.
7. Click Apply to update the configuration. Once the domain has been added, the domain
displays in the table on the Domains screen.
Configuring for NT Domain Authentication
To configure NT Domain authentication:
1. From the Access Administration menu, select Domains. The Domains window will display.
Click Add Domain.
Authenticating Users
NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
v2.1, November 2008
3-5
Advertisement
Table of Contents
