Optra E, Ep
Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using
vinyl or polyester labels.
The Optra E and Optra Ep support stocks up to 163 g/m
The following table lists the maximum weights supported by Tray 1 and the manual feed slot.
Overview of card stock and label support
Paper source
Tray 1
Manual feed slot
For paper and transparency specifications, see the printer User's Guide.
Media specifications
Width:
Labels
Length:
Weight:
Thickness:
Smoothness:
* 150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing
degradation.
Card stock
Weight:
For more information, see "Maintenance procedures" on page 13.
2
(43 lb). Tray 1 can hold up to 10 sheets of card stock or labels.
Card stock
Index Bristol
2
163 g/m
163 g/m
2
163 g/m
163 g/m
210–216 mm (8.3–8.5 in.)
279–297 mm (11–11.7 in.)
2
120–150 g/m
(32–39 lb)
0.13–0.25 mm (0.005–0.01 in.)
100–400 Sheffield*
2
Up to 163 g/m
2
Up to 163 g/m
Tag (100 lb)
Printer specifications
126
Tag
Cover
2
—
2
—
Index Bristol (90 lb)
Labels
Paper
Vinyl
2
—
150 g/m
2
—
150 g/m